The injector is a small-sized device that is in any modern internal combustion engine. Therefore, fuel injectors are a critical component of the engine, without which it is not able to work. Faulty injectors immediately lead to a drop in power and an increase in fuel consumption, starting a chain Read more…
Renault P9X 3.0-liter or 3.0 dci diesel engine was purchased from Isuzu from 2002 to 2010 and was installed in the largest models of the concern of its time, such as Espace and Vel Satis. This diesel engine is called Isuzu 6DE1 and is also known as Saab D308L, Opel Read more…
Mitsubishi 4G37 1.8-liter engine was produced by Japanese concern from 1983 to 1994 and was installed on popular models, such as Lancer, Galant and Eclipse. The engine was offered in carburetor and injector version ECI-MULTI. Technical specifications 4G37 carburetor 8v Characteristics Reference Fine volume 1755 cm³ Power system Carburetor Power Read more…
Technical data Characteristics CCZA CCZB CCZC CCZD Exact volume (cm³) 1984 Power system Direct injection Power (hp) 200 211 170 180 Torque (Nm) 280 Cylinder block Cast iron R4 Cylinder head Aluminum 16v Cylinder diameter (mm) 82.5 Piston stroke (mm) 92.8 Compression ratio 9.6 Hydrocompensators Yes Transmission timing Chain Fasoregulator Read more…
Already in 2003, an updated series of 2.5 TDI diesel power units was presented. First of all, the problematic timing mechanism of the engine was modernized: the camshaft cam now pressed on a roller bearing, which increased the life of the rockers. Produced from 2002 to 2003, the engine with Read more…
Peugeot EC5 1.6-liter engine or NFP is produced in Brazil and China since 2010 and is installed on such popular budget models of the concern as C-Elysee, 301 or 408. This motor is essentially a modernization of the TU5JP4 unit and has a Flexible-fuel version EC5F. The ET/EC range also Read more…
Mercedes M111 power units are inline fours, the volume of which varies between 1.8 and 2.3 liters. The first motor of this series was released back in the distant 1992, and their production was completed only in 2006. It turns out that they were produced still for the Mercedes W124 Read more…
The 1.6-liter Peugeot EP6FADTXD or 5GF engine was produced in Dover from 2018 to 2022 and was put in models such as 508, DS4, DS7, C5 Aircross in combination with 8-speed ATN8 automatic transmission. There was a separate modification of this motor for the E-Tense hybrid powertrain. Motor specifications Peugeot Read more…
In early 1991, a 2.2 liter representative of the F-series was launched under the name F22. This motor was based on the F20 and used its aluminum cylinder block, 219.5 mm high. The cylinder diameter remained unchanged, but the crankshaft was replaced with a longer stroke, with a piston stroke Read more…
Characteristics of Duratec Ti VCT 1.6 105 hp Manufacturing Bridgend Engine Plant Years of production 2010 – present day Engine type Row, gasoline Number of cylinders 4 Valves per cylinder 4 (16 in total) Cylinder block material Aluminum Power system Injector Piston stroke 81.4 mm Cylinder diameter 79 mm Compression Read more…
The 2.2-liter Peugeot DW12TED4 or DW12ATED4 engine was produced from 2000 to 2006 and was installed on the largest models of the French concern, such as 406 and 607. There were three versions of the engine: 4HX and 4HZ for passenger cars and 4HW for minivans 807 and C8. Diesel Read more…
Characteristics of the M104 engine Characteristics Value Production Stuttgart-Bad Cannstatt Plant Engine make M104 Years of manufacture 1989-1993 Cylinder block material Cast iron Power system Injector Type Ready Number of cylinders 6 Valves per cylinder 4 Piston stroke, mm 80.2 Cylinder diameter, mm 88.5 Compression ratio 10 Engine displacement, cc Read more…